Basin Plus complet pumps for all pond and watergardening use

	Click on the picture to enlarge

	Submersible pumps

	For small fountains and water jets
	Oil free motor Robust and reliable For general water circulation 1 Year warranty The BW40C6 pump is equipped with, 10 mm height and 13 mm outside diameter and a control valve
	N° : BW40C6 40 gal/h, 115 V, 6' cord $19.95

	Epoxy Series
	For fountains and spitters Ceramic covered shaft /Oil free Oversized motor Removable strainer for easy maintenance Robust and reliable For general water circulation 2 Year warranty
	N° : B210C20 210 g/h, 115 V, 20 ft cord $75.00

	N° : B325C20 325 g/h, 115 V, 20 ft cord $90.00

	N° : B535C20 535 g/h, 115 V, 20 ft cord $115.00 Click on the chart to enlarge

	Wet rotor Series
	For fountains and spitters Ceramic main shaft Oversized motor Removable strainer for easy maintenance Robust and reliable For general water circulation
	N° : BW60C6 67 g/h, 115 V, 6 ft cord $28.50

	N° : BW130C16 145 g/h, 115 V, 16 ft cord $8,50

	N° : BW250C16 260 g/h, 115 V, 16 ft cord $38.50

	N° : BW400C16 405 g/h, 115 V, 16 ft cord $52.50 Click on the chart to enlarge

	Multi fonction Series
	Ceramic components resistance Equipped with water jets and flow adjuster with side outlet to supply a waterfall or an accessory Filtering with a double grid, without sponge, to keep maintenance low Thermally protected to avoid damages to the motor
	N° : FWK300 290 gal kit, 115 V, 60 Hz, 20 ft cord $80.50

	N° : FWK475 476 gal kit, 115 V, 60 Hz, 20 ft cord $110.50

	N° : FWK650 660 gal kit, 115 V, 60 Hz, 20 ft cord $125.50

	N° : FWK800 793 gal kit, 115 V, 60 Hz, 20 ft cord $150.00

	N° : FWK1000 1,004 gal kit, 115 V, 60 Hz, 20 ft cord $165.50

	N° : FWK1300 1,320 gal kit, 115 V, 60 Hz, 20 ft cord $175.50

	Click on the chart to enlarge

	Handy tip
	WATERFLOW For an abundant flow of water over a waterfall, you need to build a catchment pond at the highest point. Because the water emerges from the hose at a certain speed, we recommend letting the water flow up to this pond, to ensure uniform down flow over the whole width of the waterfall. To see a example click here To calculate the pump you need click here

	Pump for waterfall and cascade
	Wet rotor technology: underwater use only Economy saving 16 ft electric cord Oil free motor
	N° : PC1150 1,150 g/h, 1" MNPT 115 V, 60 Hz, 16 ft cord $150.00

	N° : PC1750 2,050 g/h, 1¼" MNPT 115 V, 60 Hz, 16 ft cord $275.00

	N° : PC3850 3,850 g/h, 1¾ " MNPT 115 V, 60 Hz, 16 ft cord $225.00

	N° : PC5250 5,250 g/h, 1¾ " MNPT 115 V, 60 Hz, 16 ft cord $250.00

	N° : PC7850 7,850 g/h, 2" MNPT 115 V, 60 Hz, 16 ft cord $275.00
	Click on the chart to enlarge

	Stainless steel high capacity Series
	Handle (stainless steel) Motor head cover (cast iron) Hose coupling (cast iron and plastic)) Pump casting (cast iron) Impeller (cast iron and bronze) Motor casting (stainless steel) Strainer (plastic and stainless steel)

	N° : BSE1311015 14 x 34 cm, 6 m cord $280.00

	N° : BSE121102 15.5 x h. 35.5 cm, 6 m cord $320.00

N° : BSE11102 19 x 50 cm, 6 m cord $580.00

N° : BSE11103 19 x 50 cm, 6 m cord $655.00

N° : BSE12203 19 x 50 cm, 6 m cord $655.00

N° : BSE22204 22 x 54 cm, 6 m cord $1,100.00

N° : BSE32205 24 x 58 cm, 6 m cord $1,500.00

Click on the chart to enlarget Adapters BSE series